research
Severo Ochoa Centre of Excellence (2019-2023) under the grant CEX2018-000797-S funded by MCIN/AEI/10.13039/501100011033 [+]
Severo Ochoa publications
- Andrade C., Initial steps of corrosion and oxide characteristics, Structural Concrete, vol: 21, issue: 5, 1710 - 1719, 2020.
10.1002/suco.201900318 - Andrade C., Electrochemical methods for on-site corrosion detection, Structural Concrete, vol: 21, issue: 4, 1385 - 1395, 2020.
10.1002/suco.201900426 - Andrade C., Notes on prevention and site quantification of reinforcement corrosion, Corrosion Management, vol: 2020-August, issue: 156, 25 - 29, 2020.
link - Andrade C., Izquierdo D., Propagation period modeling and limit state of degradation, Structural Concrete, vol: 21, issue: 5, 1720 - 1731, 2020.
10.1002/suco.201900427 - Andrade C., Saucedo L., Rebolledo N., Cabeza S., Meinel D., X-Ray computed tomography and traditional analysis of a capillary absorption test in cement pastes, Cement and Concrete Composites, vol: 113, 2020.
10.1016/j.cemconcomp.2020.103634 - Andrade D.G., Leitão C., Dialami N., Chiumenti M., Rodrigues D.M., Modelling torque and temperature in friction stir welding of aluminium alloys, International Journal of Mechanical Sciences, vol: 182, 2020.
10.1016/j.ijmecsci.2020.105725 - Angst U., Moro F., Geiker M., Kessler S., Beushausen H., Andrade C., Lahdensivu J., Köliö A., Imamoto K.-I., von Greve-Dierfeld S., Serdar M., Corrosion of steel in carbonated concrete: Mechanisms, practical experience, and research priorities – A critical review by RILEM TC 281-CCC, RILEM Technical Letters, vol: 5, 85 - 100, 2020.
10.21809/rilemtechlett.2020.127 - Badia S., Bonilla J., Mabuza S., Shadid J.N., On differentiable local bounds preserving stabilization for Euler equations, Computer Methods in Applied Mechanics and Engineering, vol: 370, 2020.
10.1016/j.cma.2020.113267 - Badia S., Martín A.F., A tutorial-driven introduction to the parallel finite element library FEMPAR v1.0.0, Computer Physics Communications, vol: 248, 2020.
10.1016/j.cpc.2019.107059 - Badia S., Martín A.F., Neiva E., Verdugo F., A generic finite element framework on parallel tree-based adaptive meshes, SIAM Journal on Scientific Computing, vol: 42, issue: 6, C436 - C468, 2020.
10.1137/20M1328786 - Baiges J., Codina R., Castañar I., Castillo E., A finite element reduced-order model based on adaptive mesh refinement and artificial neural networks, International Journal for Numerical Methods in Engineering, vol: 121, issue: 4, 588 - 601, 2020.
10.1002/nme.6235 - Barbat G.B., Cervera M., Chiumenti M., Espinoza E., Structural size effect: Experimental, theoretical and accurate computational assessment, Engineering Structures, vol: 213, 2020.
10.1016/j.engstruct.2020.110555 - Belletti B., Rodríguez J., Andrade C., Franceschini L., Sánchez Montero J., Vecchi F., Experimental tests on shear capacity of naturally corroded prestressed beams, Structural Concrete, vol: 21, issue: 5, 1777 - 1793, 2020.
10.1002/suco.202000205 - Belletti B., Vecchi F., Bandini C., Andrade C., Montero J.S., Numerical evaluation of the corrosion effects in prestressed concrete beams without shear reinforcement, Structural Concrete, vol: 21, issue: 5, 1794 - 1809, 2020.
10.1002/suco.201900283 - Bermúdez C.A., Pujades L.G., Barbat A.H., Setting of the parameters to capacity spectra of steel buildings [Parametrización de espectros de capacidad de edificios de acero], Revista Internacional de Métodos Numéricos para Calculo y Diseño en Ingeniería, vol: 36, issue: 1, 2020.
10.23967/j.rimni.2020.01.004 - Bonilla J., Badia S., Monotonicity-preserving finite element schemes with adaptive mesh refinement for hyperbolic problems, Journal of Computational Physics, vol: 416, 2020.
10.1016/j.jcp.2020.109522 - Bravo R., Ortiz P., Idelsohn S., Becker P., Sediment transport problems by the particle finite element method (PFEM), Computational Particle Mechanics, vol: 7, issue: 1, 139 - 149, 2020.
10.1007/s40571-019-00255-y - Cabeza S., Zubiaur P.P., Garcés G., Andrade C., Adeva P., Corrosion behaviour of mg98.5nd1zn0.5 (at. %) alloy in phosphate buffered saline solution, Metals, vol: 10, issue: 1, 2020.
10.3390/met10010148 - Carbonell J.M., Rodríguez J.M., Oñate E., Modelling 3D metal cutting problems with the particle finite element method, Computational Mechanics, vol: 66, issue: 3, 603 - 624, 2020.
10.1007/s00466-020-01867-5 - Castañar I., Baiges J., Codina R., A stabilized mixed finite element approximation for incompressible finite strain solid dynamics using a total Lagrangian formulation, Computer Methods in Applied Mechanics and Engineering, vol: 368, 2020.
10.1016/j.cma.2020.113164 - Castelltort F.X., Bladé E., Balasch J.C., Ribé M., The backwater effect as a tool to assess formative long-term flood regimes, Quaternary International, vol: 538, 29 - 43, 2020.
10.1016/j.quaint.2020.01.012 - Celigueta M.A., Latorre S., Arrufat F., Oñate E., An accurate nonlocal bonded discrete element method for nonlinear analysis of solids: application to concrete fracture tests, Computational Particle Mechanics, vol: 7, issue: 3, 543 - 553, 2020.
10.1007/s40571-019-00278-5 - Cervera M., Barbat G.B., Chiumenti M., Architecture of a multi-crack model with full closing, reopening and sliding capabilities, Computational Mechanics, vol: 65, issue: 6, 1593 - 1620, 2020.
10.1007/s00466-020-01836-y - Cervera M., Wu J.-Y., Chiumenti M., Kim S., Strain localization analysis of Hill’s orthotropic elastoplasticity: analytical results and numerical verification, Computational Mechanics, vol: 65, issue: 2, 533 - 554, 2020.
10.1007/s00466-019-01782-4 - Chacón R., Claure F., De Coss O., Development of VR/AR Applications for Experimental Tests of Beams, Columns, and Frames, Journal of Computing in Civil Engineering, vol: 34, issue: 5, 2020.
10.1061/(ASCE)CP.1943-5487.0000908 - Chinchón-Payá S., Andrade C., Chinchón S., Use of anthocyanin solutions in portland cement concrete to identify carbonation depth, Materials and Structures/Materiaux et Constructions, vol: 53, issue: 4, 2020.
10.1617/s11527-020-01518-4 - Colom-Cobb J., Garcia-Espinosa J., Servan-Camas B., Nadukandi P., A second-order semi-Lagrangian particle finite element method for fluid flows, Computational Particle Mechanics, vol: 7, issue: 1, 3 - 18, 2020.
10.1007/s40571-019-00258-9 - Cornejo A., Mataix V., Zárate F., Oñate E., Combination of an adaptive remeshing technique with a coupled FEM–DEM approach for analysis of crack propagation problems, Computational Particle Mechanics, vol: 7, issue: 4, 735 - 752, 2020.
10.1007/s40571-019-00306-4 - Cremonesi M., Franci A., Idelsohn S., Oñate E., A State of the Art Review of the Particle Finite Element Method (PFEM), Archives of Computational Methods in Engineering, vol: 27, issue: 5, 1709 - 1735, 2020.
10.1007/s11831-020-09468-4 - Damians I.P., Bathurst R.J., Olivella S., Lloret A., Josa A., 3D modelling of strip reinforced MSE walls, Acta Geotechnica, 2020.
10.1007/s11440-020-01057-w - Damians I.P., Olivella S., Gens A., Modelling gas flow in clay materials incorporating material heterogeneity and embedded fractures, International Journal of Rock Mechanics and Mining Sciences, vol: 136, 2020.
10.1016/j.ijrmms.2020.104524 - De Corato M., Arqué X., Patinõ T., Arroyo M., Sánchez S., Pagonabarraga I., Self-Propulsion of Active Colloids via Ion Release: Theory and Experiments, Physical Review Letters, vol: 124, issue: 10, 2020.
10.1103/PhysRevLett.124.108001 - De Corato M., Pagonabarraga I., Abdelmohsen L.K.E.A., Sánchez S., Arroyo M., Spontaneous polarization and locomotion of an active particle with surface-mobile enzymes, Physical Review Fluids, vol: 5, issue: 12, 2020.
10.1103/PhysRevFluids.5.122001 - Demidov D., Rossi R., Subdomain Deflation Combined with Local AMG: A Case Study Using AMGCL Library, Lobachevskii Journal of Mathematics, vol: 41, issue: 4, 491 - 511, 2020.
10.1134/S1995080220040071 - Dialami N., Cervera M., Chiumenti M., Defect formation and material flow in Friction Stir Welding, European Journal of Mechanics, A/Solids, vol: 80, 2020.
10.1016/j.euromechsol.2019.103912 - Dialami N., Chiumenti M., Cervera M., Rossi R., Chasco U., Domingo M., Numerical and experimental analysis of the structural performance of AM components built by fused filament fabrication, International Journal of Mechanics and Materials in Design, 2020.
10.1007/s10999-020-09524-8 - Díez P., Zlotnik S., García-González A., Huerta A., Encapsulated PGD Algebraic Toolbox Operating with High-Dimensional Data, Archives of Computational Methods in Engineering, vol: 27, issue: 4, 1321 - 1336, 2020.
10.1007/s11831-019-09378-0 - Fantino E., Flores R., Peláez J., Raposo-Pulido V., Reduction of saturn orbit insertion impulse using deep-space low thrust, Journal of Guidance, Control, and Dynamics, vol: 43, issue: 4, 729 - 740, 2020.
10.2514/1.G004587 - Feng C., Li S., Lin Q., A block particle coupled model and its application to landslides, Theoretical and Applied Mechanics Letters, vol: 10, issue: 2, 79 - 86, 2020.
10.1016/j.taml.2020.01.022 - Franci A., Lagrangian finite element method with nodal integration for fluid–solid interaction, Computational Particle Mechanics, 2020.
10.1007/s40571-020-00338-1 - Franci A., Cremonesi M., Perego U., Crosta G., Oñate E., 3D simulation of Vajont disaster. Part 1: Numerical formulation and validation, Engineering Geology, vol: 279, 2020.
10.1016/j.enggeo.2020.105854 - Franci A., Cremonesi M., Perego U., Oñate E., A Lagrangian nodal integration method for free-surface fluid flows, Computer Methods in Applied Mechanics and Engineering, vol: 361, 2020.
10.1016/j.cma.2019.112816 - Franci A., Cremonesi M., Perego U., Oñate E., Crosta G., 3D simulation of Vajont disaster. Part 2: Multi-failure scenarios, Engineering Geology, vol: 279, 2020.
10.1016/j.enggeo.2020.105856 - Franci A., de-Pouplana I., Casas G., Celigueta M.Á., González-Usúa J., Oñate E., PFEM–DEM for particle-laden flows with free surface, Computational Particle Mechanics, vol: 7, issue: 1, 101 - 120, 2020.
10.1007/s40571-019-00244-1 - Garrido J., Sauri S., Marrero Á., Gül U., Rúa C., Predicting the future capacity and dimensions of container ships, Transportation Research Record, vol: 2674, issue: 9, 177 - 190, 2020.
10.1177/0361198120927395 - Giacomini M., Sevilla R., Huerta A., HDGlab: An Open-Source Implementation of the Hybridisable Discontinuous Galerkin Method in MATLAB, Archives of Computational Methods in Engineering, 2020.
10.1007/s11831-020-09502-5 - Grillone B., Danov S., Sumper A., Cipriano J., Mor G., A review of deterministic and data-driven methods to quantify energy efficiency savings and to predict retrofitting scenarios in buildings, Renewable and Sustainable Energy Reviews, vol: 131, 2020.
10.1016/j.rser.2020.110027 - Hariri-Ardebili M.A., Salazar F., Engaging soft computing in material and modeling uncertainty quantification of dam engineering problems, Soft Computing, vol: 24, issue: 15, 11583 - 11604, 2020.
10.1007/s00500-019-04623-x - Hashemi M.R., Ryzhakov P.B., Rossi R., An enriched finite element/level-set method for simulating two-phase incompressible fluid flows with surface tension, Computer Methods in Applied Mechanics and Engineering, vol: 370, 2020.
10.1016/j.cma.2020.113277 - Hernández J.A., A multiscale method for periodic structures using domain decomposition and ECM-hyperreduction, Computer Methods in Applied Mechanics and Engineering, vol: 368, 2020.
10.1016/j.cma.2020.113192 - Idelsohn S., Nigro N., Larreteguy A., Gimenez J.M., Ryzhakov P., A pseudo-DNS method for the simulation of incompressible fluid flows with instabilities at different scales, Computational Particle Mechanics, vol: 7, issue: 1, 19 - 40, 2020.
10.1007/s40571-019-00264-x - Jiménez S., Cornejo A., Barbu L.G., Oller S., Barbat A.H., Analysis of the mock-up of a reactor containment building: Comparison with experimental results, Nuclear Engineering and Design, vol: 359, 2020.
10.1016/j.nucengdes.2019.110454 - La Spina A., Kronbichler M., Giacomini M., Wall W.A., Huerta A., A weakly compressible hybridizable discontinuous Galerkin formulation for fluid–structure interaction problems, Computer Methods in Applied Mechanics and Engineering, vol: 372, 2020.
10.1016/j.cma.2020.113392 - Lantada N., Carreño M.L., Jaramillo N., Disaster risk reduction: A decision-making support tool based on the morphological analysis, International Journal of Disaster Risk Reduction, vol: 42, 2020.
10.1016/j.ijdrr.2019.101342 - Larion Y., Zlotnik S., Massart T.J., Díez P., Building a certified reduced basis for coupled thermo-hydro-mechanical systems with goal-oriented error estimation, Computational Mechanics, vol: 66, issue: 3, 559 - 573, 2020.
10.1007/s00466-020-01865-7 - Liro M., Ruiz-Villanueva V., Mikuś P., Wyżga B., Bladé Castellet E., Changes in the hydrodynamics of a mountain river induced by dam reservoir backwater, Science of the Total Environment, vol: 744, 2020.
10.1016/j.scitotenv.2020.140555 - Löhner R., Antil H., Idelsohn S., Oñate E., Detailed simulation of viral propagation in the built environment, Computational Mechanics, vol: 66, issue: 5, 1093 - 1107, 2020.
10.1007/s00466-020-01881-7 - Lu X., Cervera M., Chiumenti M., Li J., Ji X., Zhang G., Lin X., Modeling of the effect of the building strategy on the thermomechanical response of ti-6al-4v rectangular parts manufactured by laser directed energy deposition, Metals, vol: 10, issue: 12, 1 - 18, 2020.
10.3390/met10121643 - Mánica M.A., Gens A., Ovando-Shelley E., Botero E., Vaunat J., An effective combined framework for modelling the time-dependent behaviour of soft structured clays, Acta Geotechnica, 2020.
10.1007/s11440-020-01025-4 - Marti J., Ryzhakov P., Improving accuracy of the moving grid particle finite element method via a scheme based on Strang splitting, Computer Methods in Applied Mechanics and Engineering, vol: 369, 2020.
10.1016/j.cma.2020.113212 - Marti J., Ryzhakov P., An explicit/implicit Runge–Kutta-based PFEM model for the simulation of thermally coupled incompressible flows, Computational Particle Mechanics, vol: 7, issue: 1, 57 - 69, 2020.
10.1007/s40571-019-00229-0 - Martínez A., Muñiz A.L., Soudah E., Calvo J., Suárez A.Á., Cobo J., Cobo T., Physiological and geometrical effects in the upper airways with and without mandibular advance device for sleep apnea treatment, Scientific Reports, vol: 10, issue: 1, 2020.
10.1038/s41598-020-61467-4 - Marulanda Fraume M.-C., Cardona A O.-D., Marulanda Fraume P., Carreño T M.-L., Barbat A.H., Evaluating risk from a holistic perspective to improve resilience: The United Nations evaluation at global level, Safety Science, vol: 127, 2020.
10.1016/j.ssci.2020.104739 - Mena R., Aguado J.V., Guinard S., Huerta A., Reshaping diagrams for bending straightening of forged aeronautical components, International Journal of Advanced Manufacturing Technology, vol: 110, issue: 44352, 1485 - 1502, 2020.
10.1007/s00170-020-05856-z - Montellà E.P., Chareyre B., Salager S., Gens A., Benchmark cases for a multi-component Lattice–Boltzmann method in hydrostatic conditions, MethodsX, vol: 7, 2020.
10.1016/j.mex.2020.101090 - Montellá E.P., Yuan C., Chareyre B., Gens A., Hybrid multi-scale model for partially saturated media based on a pore network approach and lattice Boltzmann method, Advances in Water Resources, vol: 144, 2020.
10.1016/j.advwatres.2020.103709 - Moreno L., Codina R., Baiges J., Solution of transient viscoelastic flow problems approximated by a term-by-term VMS stabilized finite element formulation using time-dependent subgrid-scales, Computer Methods in Applied Mechanics and Engineering, vol: 367, 2020.
10.1016/j.cma.2020.113074 - Mulligan R.P., Franci A., Celigueta M.A., Take W.A., Simulations of Landslide Wave Generation and Propagation Using the Particle Finite Element Method, Journal of Geophysical Research: Oceans, vol: 125, issue: 6, 2020.
10.1029/2019JC015873 - Muñoz-La Rivera F., Mora-Serrano J., Valero I., Oñate E., Methodological-Technological Framework for Construction 4.0, Archives of Computational Methods in Engineering, 2020.
10.1007/s11831-020-09455-9 - Neiva E., Chiumenti M., Cervera M., Salsi E., Piscopo G., Badia S., Martín A.F., Chen Z., Lee C., Davies C., Numerical modelling of heat transfer and experimental validation in powder-bed fusion with the virtual domain approximation, Finite Elements in Analysis and Design, vol: 168, 2020.
10.1016/j.finel.2019.103343 - Ortega E., Flores R., Aeroelastic analysis of parachute deceleration systems with empirical aerodynamics, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol: 234, issue: 3, 729 - 741, 2020.
10.1177/0954410019883109 - Parada S., Baiges J., Codina R., A fractional step method for computational aeroacoustics using weak imposition of Dirichlet boundary conditions, Computers and Fluids, vol: 197, 2020.
10.1016/j.compfluid.2019.104374 - Puigferrat A., de-Pouplana I., Oñate E., FIC–FEM formulation for the multidimensional transient advection–diffusion–absorption equation, Computer Methods in Applied Mechanics and Engineering, vol: 365, 2020.
10.1016/j.cma.2020.112984 - Ramos-Fuertes A., Vega J.C., Palau A., Armengol J., Casasola A., Rodríguez A., Dolz J., Thermal response of Sanabria lake to global change (NW Spain) [Respuesta térmica del lago de Sanabria al cambio global (NO España)], Limnetica, vol: 39, issue: 1, 455 - 468, 2020.
10.23818/limn.39.29 - Raote I., Chabanon M., Walani N., Arroyo M., Garcia-Parajo M.F., Malhotra V., Campelo F., A physical mechanism of tango1-mediated bulky cargo export, eLife, vol: 9, 1 - 41, 2020.
10.7554/eLife.59426 - Reis J., Moitinho de Almeida J.P., Díez P., Zlotnik S., Error estimation for proper generalized decomposition solutions: A dual approach, International Journal for Numerical Methods in Engineering, vol: 121, issue: 23, 5275 - 5294, 2020.
10.1002/nme.6452 - Reis J., Moitinho de Almeida J.P., Díez P., Zlotnik S., Error estimation and adaptivity for PGD based on complementary solutions applied to a simple 1D problem, Advanced Modeling and Simulation in Engineering Sciences, vol: 7, issue: 1, 2020.
10.1186/s40323-020-00180-3 - Reyes R., Codina R., Element boundary terms in reduced order models for flow problems: Domain decomposition and adaptive coarse mesh hyper-reduction, Computer Methods in Applied Mechanics and Engineering, vol: 368, 2020.
10.1016/j.cma.2020.113159 - Reyes R., Codina R., Projection-based reduced order models for flow problems: A variational multiscale approach, Computer Methods in Applied Mechanics and Engineering, vol: 363, 2020.
10.1016/j.cma.2020.112844 - Riccobelli D., Noselli G., Arroyo M., DeSimone A., Mechanics of axisymmetric sheets of interlocking and slidable rods, Journal of the Mechanics and Physics of Solids, vol: 141, 2020.
10.1016/j.jmps.2020.103969 - Rivera F.M.-L., Hermosilla P., Delgadillo J., Echeverría D., The sustainable development goals (SDGs) as a basis for innovation skills for engineers in the industry 4.0 context, Sustainability (Switzerland), vol: 12, issue: 16, 2020.
10.3390/su12166622 - Roca D., Pámies T., Cante J., Lloberas-Valls O., Oliver J., Experimental and numerical assessment of local resonance phenomena in 3D-printed acoustic metamaterials, Journal of Vibration and Acoustics, Transactions of the ASME, vol: 142, issue: 2, 2020.
10.1115/1.4045774 - Rocas M., García-González A., Larráyoz X., Díez P., Nonintrusive Stochastic Finite Elements for Crashworthiness with VPS/Pamcrash, Archives of Computational Methods in Engineering, vol: 27, issue: 4, 1337 - 1362, 2020.
10.1007/s11831-019-09397-x - Rodríguez J.M., Carbonell J.M., Jonsén P., Numerical Methods for the Modelling of Chip Formation, Archives of Computational Methods in Engineering, vol: 27, issue: 2, 387 - 412, 2020.
10.1007/s11831-018-09313-9 - Rodríguez J.M., Larsson S., Carbonell J.M., Jonsén P., Dislocation density based flow stress model applied to the PFEM simulation of orthogonal cutting processes of Ti-6Al-4V, Materials, vol: 13, issue: 8, 2020.
10.3390/MA13081979 - Romero-Chambi E., Villarroel-Quezada S., Atencio E., Rivera F.M.-L., Analysis of optimal flight parameters of unmanned aerial vehicles (UAVs) for detecting potholes in pavements, Applied Sciences (Switzerland), vol: 10, issue: 12, 1 - 33, 2020.
10.3390/APP10124157 - Ros Chaos S., Pallis A.A., Saurí Marchán S., Pino Roca D., Sánchez-Arcilla Conejo A., Economies of scale in cruise shipping, Maritime Economics and Logistics, 2020.
10.1057/s41278-020-00158-3 - Ruano G., Bellomo F., López G., Bertuzzi A., Nallim L., Oller S., Mechanical behaviour of cementitious composites reinforced with bagasse and hemp fibers, Construction and Building Materials, vol: 240, 2020.
10.1016/j.conbuildmat.2019.117856 - Salazar F., San-Mauro J., Celigueta M.Á., Oñate E., Shockwaves in spillways with the particle finite element method, Computational Particle Mechanics, vol: 7, issue: 1, 87 - 99, 2020.
10.1007/s40571-019-00252-1 - Salazar F., Vicente D.J., Irazábal J., de-Pouplana I., San Mauro J., A Review on Thermo-mechanical Modelling of Arch Dams During Construction and Operation: Effect of the Reference Temperature on the Stress Field, Archives of Computational Methods in Engineering, vol: 27, issue: 5, 1681 - 1707, 2020.
10.1007/s11831-020-09439-9 - Salgado-Gálvez M.A., Ordaz M., Huerta B., Singh S.K., Pérez-Campos X., Simple rules for choosing fault planes in almost real-time post-earthquake loss assessments, Natural Hazards, vol: 104, issue: 1, 639 - 658, 2020.
10.1007/s11069-020-04184-5 - Sánchez E.D., Nallim L.G., Bellomo F.J., Oller S.H., Generalized viscoelastic model for laminated beams using hierarchical finite elements, Composite Structures, vol: 235, 2020.
10.1016/j.compstruct.2019.111794 - Sanz-Ramos M., Martí-Cardona B., Bladé E., Seco I., Amengual A., Roux H., Romero R., NRCS-CN Estimation from Onsite and Remote Sensing Data for Management of a Reservoir in the Eastern Pyrenees, Journal of Hydrologic Engineering, vol: 25, issue: 9, 2020.
10.1061/(ASCE)HE.1943-5584.0001979 - Sautter K.B., Teschemacher T., Celigueta M.A., Bucher P., Bletzinger K.-U., Wüchner R., Partitioned Strong Coupling of Discrete Elements with Large Deformation Structural Finite Elements to Model Impact on Highly Flexible Tension Structures, Advances in Civil Engineering, vol: 2020, 2020.
10.1155/2020/5135194 - Sevilla R., Borchini L., Giacomini M., Huerta A., Hybridisable discontinuous Galerkin solution of geometrically parametrised Stokes flows, Computer Methods in Applied Mechanics and Engineering, vol: 372, 2020.
10.1016/j.cma.2020.113397 - Soriano J.B., Fernández E., de Astorza Á., Pérez de Llano L.A., Fernández-Villar A., Carnicer-Pont D., Alcázar-Navarrete B., García A., Morales A., Lobo M., Maroto M., Ferreras E., Soriano C., Del Rio-Bermudez C., Vega-Piris L., Basagaña X., Muncunill J., Cosio B.G., Lumbreras S., Catalina C., Alzaga J.M., Quilón D.G., Valdivia C.A., de Lara C., Ancochea J., Hospital epidemics tracker (hepitracker): Description and pilot study of a mobile app to track COVID-19 in hospital workers, JMIR Public Health and Surveillance, vol: 6, issue: 3, 2020.
10.2196/21653 - Tamellini L., Chiumenti M., Altenhofen C., Attene M., Barrowclough O., Livesu M., Marini F., Martinelli M., Skytt V., Parametric Shape Optimization for Combined Additive–Subtractive Manufacturing, JOM, vol: 72, issue: 1, 448 - 457, 2020.
10.1007/s11837-019-03886-x - Tang Z., Hu X., Périaux J., Multi-level Hybridized Optimization Methods Coupling Local Search Deterministic and Global Search Evolutionary Algorithms, Archives of Computational Methods in Engineering, vol: 27, issue: 3, 939 - 975, 2020.
10.1007/s11831-019-09336-w - Tanyildiz D.C., Marti J., Rossi R., Solution of Navier–Stokes equations on a fixed mesh using conforming enrichment of velocity and pressure, Computational Particle Mechanics, vol: 7, issue: 1, 71 - 86, 2020.
10.1007/s40571-019-00285-6 - Tello A., Codina R., Baiges J., Fluid structure interaction by means of variational multiscale reduced order models, International Journal for Numerical Methods in Engineering, vol: 121, issue: 12, 2601 - 2625, 2020.
10.1002/nme.6321 - Torres J., Andrade C., Sánchez J., Initiation period of corrosion by chloride ion according to EHE 08 in cracked concrete elements [Periodo de iniciación de la corrosión por ión cloruro según la EHE 08 en elementos de hormigón fisurados], Informes de la Construccion, vol: 72, issue: 557, 2020.
10.3989/IC.70275 - Vila-Pérez J., Giacomini M., Sevilla R., Huerta A., Hybridisable Discontinuous Galerkin Formulation of Compressible Flows, Archives of Computational Methods in Engineering, 2020.
10.1007/s11831-020-09508-z - Villarroel-Schneider J., Mainali B., Martí-Herrero J., Malmquist A., Martin A., Alejo L., Biogas based polygeneration plant options utilizing dairy farms waste: A Bolivian case, Sustainable Energy Technologies and Assessments, vol: 37, 2020.
10.1016/j.seta.2019.100571 - Vilms Pedersen S., Martí-Herrero J., Singh A.K., Sommer S.G., Hafner S.D., Management and design of biogas digesters: A non-calibrated heat transfer model, Bioresource Technology, vol: 296, 2020.
10.1016/j.biortech.2019.122264 - von Greve-Dierfeld S., Lothenbach B., Vollpracht A., Wu B., Huet B., Andrade C., Medina C., Thiel C., Gruyaert E., Vanoutrive H., Saéz del Bosque I.F., Ignjatovic I., Elsen J., Provis J.L., Scrivener K., Thienel K.-C., Sideris K., Zajac M., Alderete N., Cizer Ö., Van den Heede P., Hooton R.D., Kamali-Bernard S., Bernal S.A., Zhao Z., Shi Z., De Belie N., Understanding the carbonation of concrete with supplementary cementitious materials: a critical review by RILEM TC 281-CCC, Materials and Structures/Materiaux et Constructions, vol: 53, issue: 6, 2020.
10.1617/s11527-020-01558-w - Wang J., Zheng Y., Chen J., Xie F., Zhang J., Périaux J., Tang Z., Single/two-objective aerodynamic shape optimization by a Stackelberg/adjoint method, Engineering Optimization, vol: 52, issue: 5, 753 - 776, 2020.
10.1080/0305215X.2019.1618287 - Yago D., Cante J., Lloberas-Valls O., Oliver J., Topology optimization of thermal problems in a nonsmooth variational setting: closed-form optimality criteria, Computational Mechanics, vol: 66, issue: 2, 259 - 286, 2020.
10.1007/s00466-020-01850-0 - Yago D., Cante J., Lloberas-Valls O., Oliver J., Topology optimization using the unsmooth variational topology optimization (UNVARTOP) method: an educational implementation in MATLAB, Structural and Multidisciplinary Optimization, 2020.
10.1007/s00158-020-02722-0 - Zorrilla R., Rossi R., Wüchner R., Oñate E., An embedded Finite Element framework for the resolution of strongly coupled Fluid–Structure Interaction problems. Application to volumetric and membrane-like structures, Computer Methods in Applied Mechanics and Engineering, vol: 368, 2020.
10.1016/j.cma.2020.113179 - Zorrilla R., Soudah E., Rossi R., Computational modeling of the fluid flow in type B aortic dissection using a modified finite element embedded formulation, Biomechanics and Modeling in Mechanobiology, vol: 19, issue: 5, 1565 - 1583, 2020.
10.1007/s10237-020-01291-x
SOURCE: www.scopus.com